This article discusses common troubleshooting problems regarding the CN301 Series – 4K IP PoE Bullet Security Camera.

I need to reset my camera

1. With the compartment cover removed, locate the reset button.
2. Press and hold the reset button for at least 10 seconds until the camera restarts.
3. Release the button and allow the camera to reboot. The camera will be restored to factory default settings.

I need to optimize the placement of my camera?

Here are some strategic camera placement tips to ensure optimal coverage.

• Entry Points: Install your cameras near entry points such as doors, if you want to see who is entering and exiting. 

• Avoid Obstructions: Identify critical viewpoints that offer a clear line of sight. Avoid obstacles within your home that could obstruct your camera's view. 

• Consider Lighting Conditions: Be mindful of lighting conditions, ensuring your camera is not pointing directly into bright light sources. Position your camera to take advantage of natural or existing lighting for optimal image quality.

• Camera Height: Install your cameras at an optimal height to deter tampering by children and pets while providing a clear view.

• Camera Tilt and Angle: Tilt your camera slightly downward to capture facial features and minimize the risk of glare. Experiment with different angles to find the best view.

• Compliance with Laws: Be aware of privacy laws and regulations related to surveillance cameras in your region. Avoid pointing your cameras directly into neighboring properties.

I need to install my camera?

Follow the instructions for step-by-step guidance.

How do I replace/Insert an SD card?

1. Use a screwdriver to remove the two screws securing the compartment cover.
2. Remove the cover to reveal the microSD card slot and the reset button.
3. To insert the microSD card: Slide the card into the slot until it clicks into place.
4. To remove the microSD card: Gently press the card inward until it clicks, then release to eject.
5. Reinstall the compartment cover and tighten both screws to maintain a weather-resistant seal.