Installation Guides (50)
N920 Series - 4K+ Ultra HD 12MP 16 Camera Capable: Installation Guide
This guide provides step-by-step instructions for installing your N920 Recorder.What is included:N920 Recorder: N920 Recorder Power adapter with power cable SATA cable 3 foot / 0.91 meter Ethernet cable HDMI Cable...
N910 Series - 4K+ Ultra HD 12MP 16 Camera Capable NVR: Package and Envelope Detection
The following article helps you detect and capture packages in the camera's field-of-view while triggering alarms and/or notifications.TABLE OF CONTENTS Ensuring Package & Envelope Detection Accuracy Enable Package & Envelope...
N883, N884 Series: Enable Audio Recording
The following article provides instructions for enabling audio recording on your NVR. Caution: Audio recording and / or use of listen-in audio without consent is illegal in certain jurisdictions. Lorex...
N845, N846, N847, N864 Series: Package and Envelope Detection
The following article provides instructions for setting up your system for package/envelope detection. The package/envelope detection feature allows you to set an area within the camera's field-of-view to notify you...
N842, E892 Series: Safeguard
Safeguard is a smart feature of the E892 series camera and N842 recorder. When enabled, Safeguard can detect if you left something behind or something is missing.Safeguard is disabled by...
Lorex Smart Home Security Center - Direct Setup Method vs. App Setup Method
This FAQ will walk you through the difference between using the Direct Setup Method or the App Setup Method for the Lorex Smart Home Security Center (LSHSC [L871T8]). What is...
LHB Series: Configuring motion detection settings
You can configure your LHB Series DVR system to record motion detection events. The following instructions require you to access your system using your DVR and a monitor. To enable...
N883, N884 Series: Using People Counting
The following article provides recorder instructions for using the People Counting feature on your wired cameras.TABLE OF CONTENTS Configuring People Counting Configuring In Area No. Searching for People Counting Searching...
LHB Series: Completing the setup wizard
Once you have completed setting up your LHB Series DVR and have connected it to a monitor, you must use the DVR Setup Wizard to configure required settings. Prerequisites: Complete...
N883, N884 Series: Using Heat Map
The following article provides instructions for using the heat map feature to see hot (high activity) and cold (low activity) areas of the camera's image. Heat map works as a...