This guide provides step-by-step instructions for connecting the mobile solar-powered security camera system's 4G modem to a Wi-Fi network, ensuring reliable remote connectivity for monitoring and control.

Prerequisites

• A computer (PC or laptop) with an Ethernet port
• An Ethernet cable

How to connect the 4G Modem to a Wi-Fi network

1. Power on and Connect:
   • Ensure the 4G modem/router is powered on.
   • Connect the computer to the modem using an Ethernet cable plugged into either the ETH0 or ETH1 port.
2. Access the Modem Interface:
   • Open a web browser on the connected computer.
   • Enter the default gateway IP address: 192.168.1.1
   • When prompted, log in using the default credentials:
     
     • Username: admin
     • Password: admin
3. Verify System Status:
   • Upon initial login, navigate to the System Status menu
   • Confirm that the Status is indicated as Offline
     
     
4. Configure Wi-Fi Settings:
   • From the main menu, go to Network > WLAN
   • Choose to Create a new SSID or Edit an existing one
     
5. Set Up Wi-Fi Client Mode:
   • In the SSID configuration:
     • Set Enabled to On
     • Set Mode to Client (STA)
     • From the SSID dropdown, select the desired Wi-Fi network
     • Enter the corresponding Password for the selected Wi-Fi network
     • Click OK to apply the settings
       
6. Finalize Configuration:
   • The modem/router will reboot to apply the new settings
   • After the reboot, log in again to the modem interface
   • Navigate to the System Status menu and verify that the Internet Status now reads Online
     

Reference

This guide is adapted from the official manufacturer documentation provided by the manufacturer.